FREE DOWNLOAD ACCELERATOR

 

 

Only $19.95!

 

 

 

 

Free Download Accelerator Tricks & Tips to tweak your modem.

 

CABLE, DSL & BroadBand Tweaks

 

 

After having performed the tests numerous times, and having read and applied the tweaks, I recommend you follow these steps.

1. Since this is a Registry hack, all the usual caveats about editing the Registry apply. Before doing anything else, you want to see if by some happenstance your system is already optimized using the Registry "DefaultRcvWindow" hack.

1.a. Click Start, choose Run, type "regedit" and press Enter.

1.b. Browse to the key:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\
Services\VxD\MSTCP

1.c. Check to see if there's a value named DefaultRcvWindow.

1.d. If there is no DefaultRcvWindow value, then your system is not yet optimized; if there is, note its setting but leave it alone for now.

If there is a DefaultRcvWindow value your system may have been optimized already.

1.e. Close the Registry Editor.

2. Close all running applications.

3. Start your browser and clear its cache. For IE5, select Tools, Internet Options, click the Delete Files button then click OK. For Navigator, select Edit, Preferences, Advanced, and click on Clear Memory Cache and Clear Disk Cache.

4. Close your browser then re-open it to the speed test link.

5. Follow the DSLReports steps 1-4 (use the Verbose test mode), remember to select the nearest download speed (nearest to what you're paying for) from the speed drop-down control, click the Test button and wait for the test to finish. The test takes about 30 seconds on my 768/128 Kbps downstream/upstream DSL connection.

My first-time test results--not having applied the DSLReports performance tweak--were 391/121 down/up. That's 50% slower on the downstream side than what I'm paying for! Certainly a non- optimized situation. So I followed their suggestions regarding implementing the Registry DefaultRcvWindow hack. Here's what I did.

1. I downloaded one of the ready-to-go REG files that will add the correct registry settings for you automatically. (See the table in the middle of the Windows tweaks page.) I opted to use the "Medium (32KB)" REG file for Windows 98: Rwin98-m.reg.

2. Once I had downloaded the REG file, a quick double-click on it in Windows Explorer updated my Registry. It's appropriate to click Yes when prompted "Are you sure you want to add the information in <path>\<filename>.reg to the registry?"

3. Next, and this is critical, I restarted my PC. Before you retest the speed connection, if you really want to be meticulous, clear your browser's cache and restart it. (I did.) Now go to the speed test link and perform the test once more.

My second-time test results were 624/82 Kbps. On the downstream side that's a 1.6x improvement. I FEEL THE NEED, THE NEED FOR SPEED! For a week I continued to run these tests daily by removing the DefaultRcvWindow value, rebooting, re-testing, then applying the DefaultRcvWindow hack again, rebooting, re- testing... you get the picture.

My results are consistently averaging 680 Kbps downstream OPTIMIZED and around 390 Kbps UN-OPTIMIZED. I've also been cross-checking the DSLReports test results by downloading the same large file with an FTP client. T.J., upon following these steps, also got a nice kick: a 50% improvement in his downstream speed.

Folks, if you have DSL I STRONGLY recommend you run through this procedure. It's given me on average a 60% improvement in my download times.

You can reach Lee Hudspeth at:
mailto:leehudspeth@TheNakedPC.com

Copyright © 2000, PRIME Consulting Group, Inc. and Dan Butler. All Rights Reserved.
The Naked PC is a trademark of PRIME Consulting Group, Inc.
ISSN: 1522-4422
You may reprint an article from TNPC as long as you show the entire article and include the authors byline, excerpt and subscription information as shown:
Digital Subscriber Line: Test and Improve Your Download Speed, Part 3
by Lee Hudspeth
(This article originally appeared in The Naked PC newsletter #3.08, subscribe at http://www.TheNakedPC.com)
 

 


 

 

Gizmo's three step plan to modem surfing bliss

Step 1.  Get your system back to a known state by uninstalling any existing accelerators on your PC

There are literally dozens of accelerators on the market.  Some like GetRight are solid products while others like NetSonic are little more than just hosts for adware and a lot worse.

With broadband, the more reputable of these products can make a useful improvement in your Internet speed. However with a modem connection, the gains are likely to be modest.  Some products may even make your connection run slower.  If you are using products packed with adware and spyware, your connection will almost certainly run slower.

I suggest you start out your modem tweaking procedure by getting your PC back to a known state by uninstalling any accelerator products. At least you'll know where you stand.  Besides, in step 3 I'll tell you about some great free acceleration products that will do the job without the ads and the spyware.

So that's step 1 folks. Uninstall all those accelerators right now.

Then after you've removed any accelerators, run a scan using a reputable adware/spyware cleaner to ensure that all the components of the product have been uninstalled.

I recommend. SpyBot Search and Destroy and Ad-aware for this job. Both of these scanners are free and each works just fine.  If you want to be extra careful, you can run both products. You may be surprised what these products find.

Step 2   Tune your Windows TCP settings for Modem Use

This step involves tuning your Windows TCP parameters for efficient operation with a modem connection.

Now, the Windows default TCP settings for dial up connections work pretty well. This holds true for all Windows versions since 95. 

But you have no guarantee that at this moment you are actually using the default settings. Many applications (including the accelerators mentioned above) can secretly change your settings.

And even if you are using the Windows defaults, you may be able to squeeze a tad more performance by fine tuning the settings for your exact setup.

Now, this TCP tweaking business can get mighty technical but I'm going to show you a really easy way to do it.

I recommend you download a shareware product called TweakMaster and use it to check and tune your TCP settings.

It won't cost you anything - the full featured 30 day trial version will do the job just fine. Download TweakMaster by clicking here. (1.37MB) 

Once you've downloaded and installed TweakMaster, click here for instructions.

Step 3  Use an accelerator that works

OK, if you've completed steps 1 and 2 you now have a nice clean and well tuned setup. This alone should make your Internet connection run faster.

But further improvements are possible. Now you have a couple of options:

Option 1:  This route involves installing  some acceleration software that is known to work and is adware and spyware free.

I recommend the free browsing accelerator Naviscope and the free download manager Star Downloader   These products work together nicely and won't secretly mess around with your TCP settings. Besides, free is good.

Naviscope is basically a smart caching program with the added ability to block ads, popups, sound and other media overhead.  It takes a little bit of twiddling to get working at its best and I suggest you experiment with different settings until you find the best combination for you.  I also suggest you turn off the toolbar as it can get quite visually intrusive.

As an alternative to Naviscope and Internet Explorer you could use a faster browser.  The speed champs are currently Opera and Mozilla Firebird.  Amongst the Internet Explorer based browsers, the  Avant browser is the way to go for speed.  All these browsers are available for free though the free version of Opera is ad supported.

OK, you've now accelerated your browsing so let's look at improving your downloading. Here I recommend Star Downloader. It's really easy to use and it comes with a host of features including multiple concurrent downloads, auto-recovery of broken downloads, automatic mirror site searching, integration into all the major browsers and a whole lot more. It's an impressive product by any standards and given that it free, it is a standout recommendation.

While they are fine products, Naviscope and Star Downloader can by their nature, only produce a modest improvement in speed for modem users.  (Broadband is a different story.) 

On my system I realized a 28% improvement in browsing speed to previously visited web sites and a 16% improvement in download speed.

Not enormous but still valuable, particularly when you take into account that my system was already running about 20% faster as a result of the tuning in step 1 and 2 above.

You can try other reputable accelerators but you will not really gain too much more than using NaviScope and Star Downloader. Besides, it will probably cost you money.

If you are prepared to spend some money for faster browsing then you can do much better than spending it on this class of product. Head instead, to option 2.

Option 2   This option offers you the greatest improvement possible but unfortunately it costs. Now ain't that the way of the world.

This option is to use a commercial web based acceleration service.

There are a number of these around.  Propel is the best known and the cheapest. It was also the service that gave me the best results so we'll concentrate on it here though the my comments apply to other competing services.

If you are using Earthlink Plus or StarNet for your dial-up connection then you are already using Propel - it's built into your service.  You have nothing further to gain by installing it separately. You lucky guys already have the Rolls Royce of dial up connections.

Propel works by invisibly re-routing all your web requests via Propel's distributed network of servers. This means their network sits between your PC and whatever site you are trying to access.

This redirection is handled invisibly by free client software provided by Propel that you install on your PC.

Acceleration is achieved by on-the-fly compression between the client software on your PC and the Propel server network.

Further acceleration is achieved by smart caching and the maintenance of a persistent connection.

It all works surprisingly well.  Indeed, the improvement in browsing speed can be dramatic. Propel quotes figures like five times. Maybe. Subjectively I would say that it feels at least twice as fast  but that's good enough for me.

On the downside, the improvement is restricted to surfing. Download speeds are not accelerated. Nor will your email or FTP transfers run faster.

Then there is cost. The cheapest package costs around $5 month.

There is also a small loss in the quality of some images because of the compression. It's not enough to worry most users and besides, you can always right click any image and restore full quality.

You'll also need to be running Internet Explorer 5 or 6 or Netscape 4.7 or later.  It works fine with Opera, Mozilla and Mozilla Firebird but you'll have to set up the proxy settings manually.

And you shouldn't run NaviScope with Propel as their proxy settings conflict.   If you are a tech-head you can sort that conflict out but there is nothing to be gained by using both products.

So there you have the negatives, but putting those aside,  the dramatic browsing speed improvement really impressed me. As a broadband user I normally find surfing with a 56Kbps modem intolerable. Not so with Propel. In fact, on regularly visited sites, I was getting near broadband level performance from my modem connection.

Impressed? You bet. In fact I've subscribed to the service.

But please don't just take my word on this. We are talking about money here so you need to decide this one yourself.  Luckily, you can do this without spending a cent because Propel offers a seven day free trial. So click the link and go  see if it suits your needs.

NOTE: To utilize the 7 day free trial you have to sign up for a month using your credit card and then cancel within 7 days. A bit of a pain but it's worth it.  And the canceling works. I tried it out.

Well that's it folks. I'd love to know how you fared with these suggestions. How much speed improvement did you get? What TCP settings gave you the best results? Did you find much spyware.   Whatever, I'm interested. Just drop me a note at editor@techsupportalert.com

Gizmo

http://www.techsupportalert.com

 

 

 

 

DOWNLOAD WEB SPEED ACCELERATOR

 

Only $29.95!

 

 

 

 

home  |  details  |  affiliates  | contact